Veranda Living Ltd Veranda Living home page the perfect way to enjoy your garden Call Us Now On: 0870 922 0160
.

Veranda Specifications

This section takes you through the main elements of a typical veranda, the steel frame, the glazed roof and the coating processes.

At Veranda Living we do not believe in compromise. An example of this can be seen by the way we manufacture the decorative steel frame. This photo shows a part finished roof section of a veranda, as you can see the roof frame is built up in steel; we do not simply rely on the glazing bars to support the glass roof. This has two distinct advantages, firstly the roof is much stronger so we are able to manufacture much larger hips and straight sections without compromising structural integrity. If fact the steel frame means that you could walk on the glazed roof by spreading your weight across several glazing bars, although this is NOT recommended for obvious reasons. The second more important reason is that the roof structure looks more solid and it therefore more aesthetically pleasing. If you were to only use glazing bars, the roof can have a ‘flimsy’ appearance which does not tie in well with the solid appearance of the veranda frame.

Bayley veranda in factory
Veranda under construction
Click here to see final product

veranda swirl

Glass

 

Veranda Living always recommend 6mm toughened glass, although we are not limited to this. Toughened glass comes in two types; Clear (offered as standard) and opti-float glass (grey, artic blue & bronze tint). The opti-float glass reduces UV transmission by around 85%, reduces solar radiant heat transmission and also has a coloured tint. The advantages of toughed glass are that it is scratch resistant and has rounded, smooth edges which add to the quality feel of the veranda.
The maximum length of toughened glass available is 3.1m or 4.0m for additional cost. Any length above this will use aluminium joining piece to join the two length of glass together.

Another option for the toughened glass is the addition of a self cleaning polymer layer. This layer helps keep the glass clean.

Photograph of Aluminium Ally bars, veranda
Veranda with aluminium bars

veranda swirl

Glazing Bars

 

Toughened glass can only be used in sections around 600mm wide (2ft) before it begin to deflect under its own weight. As a result glazing bars are used to support the glass along the edges.

We offer two types of glazing bar as a standard, aluminium and lead covered heritage glazing bars. The aluminium glazing bars are supplied by Standard Patent Glazing and are in our opinion the best glazing bars available in the UK. These bars can be powder coated in any colour which adds protection as well as colour to the bars. The heritage glazing bar is a steel core encased in a lead sleeve.

These bars are more expensive than the aluminium bars and will also increase lead time from order to installation, they are however the more elegant than the aluminium bars.

Veranda with Lead covered bars

pdf Technical Downloads:

Rust protection and paint finish (Powder coating)

Each veranda is coated in a rust protection, either zinc spray or hot dip galvanise before being powder coated. This helps protect the steel from rusting, giving the steelwork much longer life span. The powder coating process is one of the best finishes available for protection, hardiness and finish quality. The powder coating finish quality is better on the zinc spraying process than the galvanised surface, however the galvanising process is superior. We would always recommend galvanising in high risk areas, such as near the coast. In other cases – zinc spraying is the recommended option.

Maintenance

The high quality materials and processes used makes each of our verandas virtually maintenance free. The powder coating is very hard wearing, if the coating is damaged the chips can be covered with a special spray paint provided by veranda living.

PLANNING PERMISSION

Check with you local authority's planning permission department early in the process to find out if planning permission is required. As a rule, verandas do not require planning permission if they are:

  • Built onto existing dwelling
  • Divided from the house by a door
  • Less than 70 cubic metres or 15 per cent of the original volume for a detached house (up to 115 cubic metres). Less than 50 cubic metres or ten per cent of the original volume for a terraced house or a property in a conservation area (up to 115 cubic metres)
  • Less than 30 sq metres in floor area
  • Built at ground level following low-emissivity and safety rules
  • Built a minimum of one metre away from the boundary
  • At least 75 per cent of the roof is glaz
  • The first extension to the house
  • Under normal circumstances, our verandas will comply with points 5 & 7.

 

.
Veranda Living Ltd, the perfect way to enjoy your garden
 
Return back to home page of Veranda Living Click to visit our site map of Verandas website designed and developed by Michael Associates, New Media and Marketing Solutions